AltRider Crash Bars for the Yamaha Super Tenere XT1200Z

3 280,00kr3 362,50kr inkl. moms

Artikelnummer eb64d7149ce1 Kategori Etiketter , Märke:

AltRider Crash Bars for the Yamaha Super Tenere XT1200Z

Nollställ

Beskrivning

AltRider Crash Bars for the Yamaha Super Tenere XT1200Z

Now that you’re the proud owner of a Yamaha Super Tenere XT1200Z €“ or maybe have one on order €“ you want crash bars to protect it. Ours are built from one inch stainless steel so they’re extremely resistant to rust and feature beautiful hand TIG welds.

In designing these crash bars we went through the trouble of maintaining the hidden connector in the front to yield a seamless system. Why is that important? It means the energy of a hard impact on one side can be transferred throughout the bars and to the other side. The three mounts on one side don’t have to take an entire impact load; instead it is distributed across six mount mounts so none of them are overwhelmed. All of this is important because the crash bars will not only protect the fairing in the case of a crash but also the Super Tenere’s exposed radiator.

We also conducted a thorough study to identify the bike’s contact points when on its side. This led to a crash bar design that offers a wide contact area between the crash bars and the ground. The other contact points will be the handlebar bar ends and rear passenger peg €“ protecting the fairing engine radiator and brake and shifter lever.

The crash bars allow full removal of the right-hand side panel. Because the left-hand side panel only requires periodic removal the bars were not designed to allow removal of the panel. However the left-hand side panel can be loosened enough to access to the hardware holding the gas tank in place €“ allowing the tank to be lifted up to gain access to the air box.

Available in silver or black.

*Confirmed to fit the 2014 and newer models.

**Compatible with Yamaha World-crosser Kit (OEM Frame Guards must be removed)

You can also read Jeremy’s thoughts on riding the XT1200Z in his post First Impressions of Riding the Yamaha Super Tenere XT1200Z.

  • Stainless T-304 construction
  • Hand TIG welding
  • 1 inch diameter tubing for strength
  • Available in silver or black
  • Height: 15 inches (38.1 cm)
  • Width: 20 inches (50.8 cm)
  • Depth: 18 inches (45.7 cm)
  • Weight: 11.5 lbs (5.2 kg)

http://www.youtube.com/v/L8c8cg8IzMU?version=3 http://www.youtube.com/v/dpDZtl2ZbeE?fs=1&hl=en_US http://www.youtube.com/v/sUUVQcAGLqM?fs=1&hl=en_US 

Recensioner

Det finns inga produktrecensioner än.

Endast inloggade kunder som köpt den här produkten får lämna en recension.

Genom att fortsätta använda denna webbplats godkänner du användandet av cookies. Mer information

Dina cookie-inställningar för denna webbplats är satt till ”tillåt cookies” för att ge dig den bästa upplevelsen. Om du fortsätter använda webbplatsen utan att ändra dina inställningar för cookies eller om du klickar ”Godkänn” nedan så samtycker du till detta.

Stäng