ezCAN Extension Kit for BMW & Harley Davidson

569,00kr inkl. moms

Artikelnummer H1-EXT-004 Kategori Etiketter , , , , Märke:

Introducing the HEX ezCAN Extension Kit for ezCAN for Harley Davidson and ezCAN Gen II for BMW.

This wiring kit provides an ezCAN user with everything that you would need to connect up your front auxiliary lights, brake lights and horn to the ezCAN, with additional connectors to facilitate other accessories.

I lager (kan restnoteras)

Beskrivning

Introducing the HEX ezCAN Extension Kit for ezCAN for Harley Davidson and ezCAN Gen II for BMW.

This wiring kit provides an ezCAN user with everything that you would need to connect up your front auxiliary lights, brake lights and horn to the ezCAN, with additional connectors to facilitate other accessories. In addition, the kit also provides:

  • A maximum length cable that can be trimmed to the correct length
  • Female connectors (as per ezCAN connectors) with terminals and seals are provided so that they can be used when cable is trimmed to length
  • Heat-shrink to finish off sheath when cable is trimmed
  • Male connectors to be used on your auxiliary lights and accessories wires
  • Sheathing for finishing of wiring on the light side

You can also use the output stubs connected to the extension cable to wire up your lights.

 

Product specifications:

  • Front auxiliary lights extensions (long extension):
    • 2x 1.5m long sheathed extension wire
    • 3-wire MT connectors on either end (male on ezCAN size, female on light side)
  • Horn:
    • 1x 1.5m long sheathed 1.5mm2 2-wire extension
    • 3-wire MT on ezCAN side, 2x insulated spade terminals (6.3mm) on horn side.
  • Brake/Accessory (short extension):
    • 1x 0.5m long sheathed 1.5mm2 3-wire extension
    • 3-wire MT on ezCAN side, 3-wire MT on brake/accessory side
  • All wires can be trimmed to correct length (use supplied loose connectors after trimming to length)
  • Also in bag
    • For front light extensions
      • 2x female 3-way MT connectors
      • 6x socket terminals
      • 4x male 3-way MT connectors (2x lights, 2x extra accessories)
      • 12x pin terminals
      • 18x wire seals
      • 4x blanking seals
    • For horn extension
      • 2x insulated spade terminals
    • For brake extension
      • 1x female 3-way MT connector
      • 1x male 3-way MT connector
      • 3x socket terminals
      • 3x pin terminals
      • 6x wire seals
      • 1x blanking seal
    • General
      • 6x adhesive lined heat shrink
      • 1m sheathing

Recensioner

Det finns inga produktrecensioner än.

Endast inloggade kunder som köpt den här produkten får lämna en recension.

Genom att fortsätta använda denna webbplats godkänner du användandet av cookies. Mer information

Dina cookie-inställningar för denna webbplats är satt till ”tillåt cookies” för att ge dig den bästa upplevelsen. Om du fortsätter använda webbplatsen utan att ändra dina inställningar för cookies eller om du klickar ”Godkänn” nedan så samtycker du till detta.

Stäng